Telescopic Prop
Back to product group3 m Galvanized Telescopic Prop
- Surface type
- Galvanized
- Minimum height
- 1.7 metres
- Maximum height
- 3 metres
- Outer pipe diameter
- Ø60 mm diameter
- Inner pipe diameter
- Ø48 mm diameter
- Pipe wall thickness
- Standard 2 - 2.5 - 3 - 3.5 - 4 mm and custom
- Base / head plate
- 120 × 120 mm
- Base plate thickness
- Standard 3 - 4 - 5 mm and custom
- Head options
- Flat / U / T
- Standards
- TS EN 1065 class
ESPADA İSKELE
About this product
3 m Galvanized Telescopic Prop is offered for buyers who need a galvanized telescopic prop at this working height.
With a maximum working height of 3 metres, it sits among the shorter options in Espada’s 3–6 m telescopic prop range. This model has a galvanized finish; a painted option at the same 3 metres height is also available.
Compare related heights and the painted finish below, or browse all Telescopic Prop models and request a quote for quantity and delivery.
Technical specifications
- Surface type
- Galvanized
- Minimum height
- 1.7 metres
- Maximum height
- 3 metres
- Outer pipe diameter
- Ø60 mm diameter
- Inner pipe diameter
- Ø48 mm diameter
- Pipe wall thickness
- Standard 2 - 2.5 - 3 - 3.5 - 4 mm and custom
- Base / head plate
- 120 × 120 mm
- Base plate thickness
- Standard 3 - 4 - 5 mm and custom
- Head options
- Flat / U / T
- Standards
- TS EN 1065 class
Typical uses
These are typical site scenarios for a galvanized telescopic prop at 3 metres maximum working height. Final spacing and quantity follow the formwork drawing—not this list alone.
Under-slab support
Form lines where soffit height fits the 3 metres working range.
Galvanized finish projects
Site orders that specify a galvanized finish at this height.
Height comparison
Side-by-side checks with sibling heights before locking quantity.
Clarify before you order
Frequently asked questions
What does 3 metres mean for this product?
It is the maximum working height of this telescopic prop. The typical adjustment range is about 1.7–3 m. Confirm closed and open lengths with Espada İskele against your formwork drawing before ordering.
How does the galvanized finish relate to other options?
This model is the galvanized finish at 3 metres. The other finish at the same height is offered as a separate product page so you can compare and quote the exact surface you need.
When should I choose Flat, U or T head?
Flat head suits general flat contact. U head seats H20 and beam lines and helps reduce slip. T head is chosen for beam or special bearing lines per the formwork detail. Pick the head in Get a quote with this model.
What does pipe wall thickness (2–4 mm) change?
Wall thickness is the tube wall dimension selected with the quote (typically 2–4 mm). It follows project load and site preference; Espada İskele confirms the suitable option with quantity—do not assume a capacity figure from this page alone.
Is a tripod or other accessory included on this page?
3 m Galvanized Telescopic Prop is listed by height and finish. Tripod and related accessories are specified separately with the order when the formwork detail requires them.
How do I request a quote?
Use Get a quote on this page: choose head type and wall thickness, enter quantity if known, and leave your phone. Include delivery location in follow-up if needed. Written confirmation applies before any price or capacity claim.
